Reglazing, which can also be called tile refinishing or resurfacing, makes a tile floor, bathroom, tub, shower, or backsplash look like new again.

The cost of reglazing tiles is affected by the following:

Size of the area or rooms: It costs more to refinish a large floor or several rooms than a smaller job. Small projects, on the other hand, cost more per square foot because of the minimum job fees.

Level of dirt and grime: Refinishing tile that has been dirty or worn down for a long time usually costs more.

The cost of labor varies from $40 to $120 an hour for tile contractors, depending on how much experience they have. The cost of labor is between 70% and 80% of the whole project.

Condition of the tiles: Experts say that any tile or grout repairs should be done before refinishing.

Tile repair ranges from $10 to $50 per square foot, based on the type and size of the tile. Before refinishing, replace any tiles that are broken or chipped.

It costs between $5 and $24 per square foot to reroute.

It costs between 50¢ and 3¶ per square foot to clean grout.

Location of the project: Because it is harder to get to, a small shower may be harder to refinish than an open floor.

How much it costs to paint the tub and tiles again?

For $250 to $600, you can reglaze just the bathtub. For $800 to $1,200, you can reglaze the tub and the tile around it. A tub that has been resurfaced or glazed costs less than a new one and lasts 10 to 15 years.

DIY how much does it cost to fix up tiles?

Most do-it-yourself tile refinishing kits cost between $50 and $200, but it depends on the size of the job. Ace Hardware and Lowe’s are two stores that sell epoxy acrylic reglazing kits that come with these steps:

1. Wipe down the tile to get rid of any dirt or residue.

2. Fix any holes or cracks in the tile, grout, or caulk.

3. Rough up the tile so the solution sticks to it.

4. Use painter’s tape to make lines around the edges.

5. Put on the refinishing product and primer.

1. Saltillo Tile

• Handmade terracotta clay tile from Saltillo, Mexico.
• Known for its rustic, earthy tones (yellow, orange, red, brown) and irregular shapes.
• Used for floors, patios, and decorative accents.

2. Talavera Tile

• Hand-painted ceramic tile, traditionally made in Puebla, Mexico.
• Features bright colors and intricate patterns, often floral or geometric.
• Commonly used for backsplashes, countertops, and wall decor.

3. Cantera Stone Tile

• A volcanic stone tile that is soft, porous, and easy to carve.
• Often used for flooring, fountains, fireplaces, and columns.
• Comes in various natural shades like pink, beige, and gray.

4. Mission Red Tile

• A type of red clay tile similar to Saltillo but with a smoother, more uniform surface.
• Often found in Spanish-style homes and missions.

5. Encaustic Cement Tile (Mexican Cement Tile)

• Made from pigmented cement, not clay, with bold geometric or floral patterns.
• Common in flooring, kitchens, and bathrooms.

Cost of Regrouting a Shower by Type of Grout

Fixing the grout in a shower can cost anywhere from $400 to $960, depending on the type of grout used. The price is affected by the type, and most experts say that a polymer- or epoxy-based one will work best. If you use regular grout, you need to seal it with an impregnating sealer 24 to 48 hours after it dries to keep it from getting stained. The type used depends on the joints’ type and size, as well as how hard it is to remove and re-route them. This is why you should ask your installer what kind they think is best. Some tiles’ warranties are voided if you use the wrong type, and other tiles get damaged. We will look at the different types, what they are used for, and how much they cost when used to redo an 80-square-foot shower in the table and sections that follow.

Unsanded Grout

To redo the grout in a shower that hasn’t been sanded down costs about $400 to $480, or $5 to $6 per square foot. This price includes both the labor and the materials. Many times, this material is used for joints that are less than ⅛”. If you use it in a wider joint, it might dry out too small and leave gaps. This is what you might find in a bathroom, but it depends on the tile you have. The least expensive ones are white and light gray. The most expensive ones are special colors.

Cement for Grout

Work and materials for grout cement cost around $400 to $600. There are a lot of these on the market. This thing is cheap, simple to use, and comes in lots of colors. But they shouldn’t be used in showers because the grout almost always cracks over time, and all cement grouts that aren’t sealed or changed eventually turn gray or get mildew stains on them.

Smooth Grout

For sanded grout, it costs between $480 and $640 to redo the grout in a shower. The cost of labor is usually between $6 and $8 per square foot. It has the same base as grout that hasn’t been sanded, but sand has been added to make it thicker and stronger. This type of joint filler works better with wider gaps and is less likely to break. This means that it doesn’t need to be rerouted as often as the type that isn’t sanded.

Epoxy Grout

It will cost you between $560 and $880 to cover 80 square feet with polymer grout. You can use a polymer additive or acrylic grout when you want something that will last longer. This grout is made from cement and acrylic polymers. It can be sanded or not sanded. The new cement-based one is stiffer and harder to spread, but this one is easier to work with than epoxy. There may be no volatile organic compounds (VOCs) in some brands, but some brands smell very strong. Polymer additive grouts come in the same colors as regular grouts, but they don’t need to be sealed after they’re put down. They are also known as “pre-sealed grout” sometimes. It costs more for these than other kinds.

Epoxy Grout

It costs between $720 and $960 to re-grout a shower with epoxy. Another option is epoxy-based grout, which is better for some glass tile manufacturers than basic cement grout. This grout made from epoxy resin is smoother and can be sanded or not sanded. There are strong volatile organic compounds (VOCs) that come off of it right before it is used. Epoxy is pricey and hard to spread, so you will have to pay more for labor if you choose it over cement. Epoxy, on the other hand, doesn’t crack because it’s flexible. It doesn’t stain or change color either because it doesn’t have any pores. Epoxy doesn’t soak up stains like cement-based grout does. Not all people who put in tiles have worked with epoxy, and some may not want to. With epoxy grout, you don’t have to redo the whole job unless you want to change the color. This is because epoxy grout doesn’t seal in color like sanded cement grout does.

Average Cost per Square Foot:

• HomeAdvisor: Estimates range from $5 to $25 per square foot, depending on tile type and project specifics.

• Homewyse: Provides a cost range of $15.37 to $33.72 per square foot as of January 2025, with variations due to site conditions and option

• Mexican Tile Restoration: Suggests costs between $5 to $28 per square foot, influenced by location, grout type, and tile characteristics.

Factors Influencing Costs:

1. Tile Condition: Damaged or heavily soiled tiles may require additional preparation, increasing labor time and costs.

2. Grout Type: Standard cement-based grout is typically less expensive, while epoxy or polymer grouts, known for durability and resistance to stains, are priced higher

3. Labor Rates: Professional labor charges can vary based on region and experience. It’s advisable to obtain multiple quotes to ensure competitive pricing.

4. Project Size: Larger areas might benefit from bulk pricing, potentially reducing the cost per square foot.

Estimated Total Costs:

For a standard 100-square-foot kitchen floor, the total regrouting cost can range from $500 to $2,500, based on the per-square-foot estimates provided above.

Additional Considerations:

• DIY vs. Professional Services: While DIY regrouting kits are available, achieving a durable and aesthetically pleasing result often requires professional expertise.

• Maintenance: Proper sealing after regrouting can extend the lifespan of the grout and maintain the floor’s appearance.

In summary, regrouting a kitchen floor is an effective way to enhance its look and functionality. Costs can vary widely, so it’s essential to consider the specific needs of your project and consult with professionals to obtain accurate estimates.

TILE REGROUTING COSTS

Overall regrouting expenses

Regrouting tile runs between $2 and 25 per square foot (sq. ft.). Regrout 80 square feet of tile at the national average cost of $1,320, or $16.50 per square foot. Total regrouting expenses could cover cleaning, demolition and repairs, grout removal and application, caulking and sealing.

Not every regrouting job is exactly like another. Costs depend on the condition or current tile surfaces, total square footage, materials and techniques needed. The possible regrouting project expenses for adding new grout including labor and materials are broken out here.

Shower costs, $10 to $25 per square foot Because of their frequent contact to running water, abrasive cleaners, and mold and mildew susceptibility, shower tiles usually require more frequent regrouting than other areas. Shower regrouting is more difficult and time-consuming since the inside of a shower is compact and surfaces are less easily accessible.

Walls run $5–6 per square foot. Generally speaking, well maintained, dry wall tiles stay in good condition longer than those in other areas. Usually simple and less expensive than showers, regrouting bathroom wall tiles is easy.

Floor space, $6–8 per square foot. Regular cleaning and heavy foot traffic can cause the grout separating floor tiles to deteriorate.

Countertops, $10 to $25 an hour. Usually since the surfaces of a countertop are easily reachable, routing one is a simple task. To regrout a 2 x 8-foot counter, expect to pay for roughly half-day’s labor plus materials.

Variables related to cost

These tools can influence the cost of a regrouting project.

Grout removal: $6.50–16.50 square foot. Before applying fresh grout, existing grout between tiles has to be removed. About two-thirds of the grout replacement fee goes toward labor expenses to grind grout from between tiles.

Tile width. The work takes more time since small tiles mean many voids between them that must be filled.

Grouting type. The most often used grouts are cement based ones. They present unsanded and sanded grouts. Wider joints are accomplished with sanded grouts. Depending on the tile size and joint width, a 25-pound bag of grout runs $10–25 and can cover 100 to 200 square feet of tile surface. Cost three to five times more than cement grues, epoxy grouts are more moisture resistant. Epoxy grouts call for professional application.

Sealer for grouts. One or more coats of grout sealer should be sprayed to surfaces regrouted with cement-based material for best results in terms of moisture prevention. For a regrouting operation, sealant application adds $1–3 per square foot.

Repairing tile and substrate is easy. Water seeping through unsound grout can compromise wood frame and tile underlayment. Before grouting, replace water damage including cracked or broken tiles, damaged drywall, rotted plywood and framing members. For basic regrouting, repair expenses could significantly raise the cost.

Saving money: how to do it?

This is how to save on a regrouting project.

Have tile surfaces professionally cleaned instead of regrouted. Cleaning is the better, less expensive way to freshen the look of tile and grout even if they seem dirty-looking but otherwise sound. A tiny fraction of the average cost of regrouting, tile and grout cleaning runs $2–4 per square foot. Professional cleaners usually clean tile and grout using ph-neutral detergent solutions and steam cleaning equipment.

Sealants should be applied personally. Homeowners save a few bucks by doing this part of the work themselves. To maintain the grout, follow up with at least once annual fresh coatings of sealer.

Refreshing and/or changing tile joint color can be accomplished with grout paint. Renewal of the appearance or color of sound grout joints on up to 300 square feet of tile surface is less than $15.

FAQ’s:

Bathroom tiles should be regrouted how often?

Usually, tile grout holds ten to fifteen years. Maybe you should grout showers more frequently. In any case, areas where grout is soft, powdery, missing should be regrouted right away to stop underlayment from suffering water damage and tile edge chipping.

A shower’s regrouting cost depends on what?

Shower surfaces are more likely than others to require regrouting given their continuous moisture exposure. Pay $10 to 25 per square foot installed. Yearly tile sealer applications help to protect grout.

Which is less expensive—regrouting or replacing tile?

Though most projects fall in the $5–8 per square foot range, regrouting projects average $2–25 per square feet. Installing fresh ceramic or porcelain tile will cost $7–23 per square foot plus another $2–3 per square foot to remove the old tile.

Average Costs (as of 2025):

• Per Square Foot: The cost to reglaze tiles ranges from $4 to $12 per square foot, depending on factors such as tile condition, project complexity, and regional labor rates.

• Per Room: For an average bathroom, the total cost typically falls between $300 and $1,200. Larger spaces, such as kitchens or primary bathrooms, may range from $400 to $3,000.

Factors Influencing Cost:

1. Tile Condition: Tiles with significant damage or heavy grime may require additional preparation, increasing the overall cost.

2. Labor Rates: Professional contractors charge between $40 and $120 per hour, with labor comprising approximately 70% to 80% of the total project cost.

3. Project Size: Larger areas may benefit from economies of scale, potentially reducing the cost per square foot.

4. Tile Material: While ceramic and porcelain tiles are commonly reglazed, the type of tile can influence the overall cost.

DIY vs. Professional Reglazing:

• DIY Kits: Available for $50 to $200, these kits can be a budget-friendly option for small projects. However, achieving a durable and high-quality finish may be challenging without professional expertise.

• Professional Services: Hiring experienced contractors ensures a longer-lasting and more polished result, though at a higher upfront cost.

Additional Considerations:

• Preparation: Proper cleaning and minor repairs are essential before reglazing to ensure optimal adhesion and finish quality.

• Maintenance: Post-reglazing, it’s crucial to use non-abrasive cleaners to maintain the new surface and extend its lifespan.

In summary, tile reglazing offers a budget-friendly alternative to tile replacement, with costs varying based on several factors. While DIY options exist, engaging professional services often results in a more durable and aesthetically pleasing outcome.

FREE TILE REFINISHING QUOTES IN PHOENIX

For the last 27 years, Mexican Tile Restoration has provided tile refinishing, tile restoration, grout cleaning, among other services for Saltillo tile, marble tile, travertine tile, granite tile, terrazzo tile, limestone tile, porcelain tile, and ceramic tile floors. We also offer grout cleaning/sealing

Get a free tile restoration quote anywhere in Phoenix including Scottsdale, Mesa, Tempe, Chandler or anywhere else by giving us a call today.  Mexican Tile Restoration cleans and removes scratches from old saltillo tile and grout, reverses fading damage from excessive sunlight, replaces broken tiles, matches colors for replacement tiles, mends chipped grout lines, and polishes and seals your entire floor to make it look brilliantly new again!

Cost Breakdown (as of 2025):

• Material Costs: The price of Saltillo tile varies based on quality, size, and finish. On average, homeowners can expect to pay between $2.60 and $3.55 per square foot for the tiles alone.

  For a 500-square-foot area, this translates to a material cost ranging from $1,300 to $1,775.

• Installation Costs: Labor charges for installing Saltillo tile can vary significantly based on regional labor rates and the complexity of the project. For a 500-square-foot installation, labor costs can range from $5,000 to $9,000, depending on the region and specific project requirements.

• Additional Expenses: Beyond materials and labor, it’s essential to account for additional costs such as supplies, equipment, sales tax, and potential delivery fees. These can add approximately $550 to $650 to the overall project budget.

Total Estimated Costs:

• In Charlotte, NC: The total cost for a 500-square-foot Saltillo tile flooring installation ranges from $6,800 to $11,200.

• In Seattle, WA: Due to higher labor rates, the same project may cost between $8,400 and $14,000

Considerations:

• Regional Variations: Labor and material costs can vary based on geographic location. It’s advisable to obtain quotes from local contractors to get accurate estimates tailored to your area.

• Tile Quality and Finish: Handmade tiles may have variations in size, texture, and color, which can influence the overall aesthetic and cost. Some suppliers offer pre-sealed tiles, which can reduce installation time and potential sealing costs.

• Maintenance: Saltillo tiles are porous and require proper sealing to prevent staining and moisture absorption. Regular maintenance, including resealing every few years, is essential to preserve their appearance and durability.

In summary, while Saltillo tile offers a distinctive and timeless look, it’s crucial to consider both initial installation costs and ongoing maintenance to ensure it remains a lasting feature in your home.

Saltillo Tile Near Me

Mexican Tile Restoration has been in the flooring industry for 30 years. Their commitment to tile refinishing, restoration and cleaning is unrivaled. Mexican Tile Restoration specializes in restoring valuable Saltillo tile flooring. Get a free tile restoration quote anywhere in Phoenix including: Scottsdale, Mesa, Tempe, Chandler or anywhere else by giving us a call today.

SALTILLO TILE

Don’t let your floor remodeling budget get out of hand by hidden bombshells. If you’re looking for a 2019 breakdown of the cost of saltillo tile flooring materials and what installation cost may be, keep reading to learn more.

Tile flooring and installation cost can add up fast, particularly if you’re a beginner and have never tried a Saltillo tile flooring installation before. It is strongly suggested you hire a licensed and insured Saltillo tile flooring contractor to install the flooring for you.

Make sure you have a copy of the Saltillo tile flooring manufacturer’s recommended installation requirements before you begin, to make sure your flooring project doesn’t end up costing you more money in the future.

SALTILLO TILE COST PER SQUARE FOOT

On average Saltillo tile costs $6.39 per square foot. Costs range from $4.72 to $8.05 per square foot in the US for 2019 according to improve.net.

Tile is typically a favorable choice when it comes to flooring. Homeowners love it for its design and low maintenance. But, choosing a style of tile can be hard as there are so many out there, including Saltillo tiles. Saltillo is a traditional Mexican tile that can range in color from red to yellow and even orange. Authentic Saltillo tiles don’t come with any type of finish or glaze on them. Nevertheless, there are several manufacturers that still supply Saltillo tiles with some kind of finish on them so they are ready to install.