Even though a deep cleanup by professionals is certainly an investment in prolonging your floor’s life, you also might be wondering how much it is going to. The cost of tile and grout cleaning differs wildly, however, there are several aspects impacting the final cost.

Aspects impacting Tile and Grout Cleaning Cost

The following are some aspects of tile and grout cleaning:

1. Area Of Your Tiled area

One of the most significant factors in deciding the total cost you are going to pay for your tile cleaning is the area. The bigger the area, the more the time and labor, meaning higher the costs. Overall, tile and grout cleaning costs from $1 to $3 per square foot.

2. Size Of Your Tiles

In addition to the area to be cleaned, the size of your tiles also matters in regard to determining costs. That’s because areas with larger tiles have less grout and are, therefore, easier to clean in comparison to those that have small tiles with additional grout lines.

Typically, when you have large areas with small tiles to clean, they might cost you more because of the added time, labor, and resources.

3. Type Of Cleaning Technique

Subject to the condition and requirements of your tiles and grout, the technique to clean them can differ. And based on the amount of effort and resources that go behind that technique, it can impact the final cost. The 2 most common techniques comprise manual cleaning and steam cleaning.

If they favor to steam clean your tiles and grout, they are going to use steam-based cleaning that could cost you about $1 to $4 per square foot.

For manual cleaning, they are going to hand scour your tiles and grout with cleaning resources. This could cost you about $0.5 to $5 per sq ft.

4. Amount Of Time Taken

According to what technique is used and the amount of area is to be cleaned; some cleaners could charge by an hourly basis. The more time it takes, the more work and labor they are going to require, which impacts the cost.

Normally, cleaning tile and grout costs about $30 to $50 for each hour, with a fixed rate at a minimum of $100.

5. Kind Of Your Tiles

Even though the significant aspects that determine the cleaning cost are area and amount of time, the kind of tiles your flooring has is also going to be a deciding factor.

Some kinds of tiles such as porcelain or ceramic are non-porous and are better at resisting the soaking up of dirt. Making them clean easier, which can somewhat be more budget friendly.

Whereas tiles such as natural stone, granite, or some unsealed, porous surfaces can soak in dirt fast. Making them a little more challenging to clean which can increase the total cost.

6. Additional Aspects

The following are some additional aspects of tile and grout cleaning:

Maintenance

Another aspect that can impact on the cost is to what extent you maintain your tiled flooring. When your tiles are not well-maintained and have not been cleaned for a long time, they will be dirtier and take more work to clean. However, when you clean your tiles and grout regularly, the final cost is going to be less.

Additional Sealing

Aside from cleaning, if there are any additional services associated with your tiles and grout, they can also add up to the final cost. For instance, tile and grout cleaning when added with sealing could cost you up to $5 per square foot.

Repair or Restoration

Furthermore, if your tiles are damaged and require repair, that could be an additional charge of $5 to $40 per square foot. With grout repairs or restoration, the cost range could be $1 to $25 per square foot, subject to the degree of damage.

The most significant cost aspects are the size of the area you require to be cleaned and the tiles size in the space.

When you have small-scale tiles, each square foot of tiled area is going to have additional grout lines, so costs could be twice or triple as the size of the decreases.

Add around $2.50 to $6 to the total cost if you additionally require your grout to be repaired or grout sealing along with cleaning services.

It’s vital to keep your homes tile clean—not only to retain its appearance but also for sanitary reasons. At the very least, you should clean your grout at a minimum once annually to keep it white. Hiring a tile cleaning service to clean your tile and grout could cost around $284 and $676, with the US median cost of around $479.

Tile and Grout Cleaning Cost Aspects

The following are some cost aspects of tile and grout cleaning:

Size of Room

It costs anywhere from $0.50 to $3 per square foot to get your tile and grout cleaned, with a minimum of$100 to $200. These costs usually include labor and material, so there is no need to be concerned about paying extra.

Size of Tile

The tiles size is going to influence your cleaning expenses. The smaller the tiles, the more grout the cleaning service is going to have to clean. When your cleaning service uses a manual cleaning technique and charges hourly, it is going to take them longer to clean small tiles than big ones.

Additionally, larger slab tiles require supplemental care when cleaning. Using the incorrect cleaner on a slab tile could cause damage to the whole tile, which could be expensive to replace. Your cleaning service might charge different prices based on the materials required to clean your particular tile.

Hourly Rate

Professional cleaners charge between $30 and $50 each hour for tile and grout cleaning. Don’t forget that many cleaning services have a minimum of $100 to $200, so expect to pay at a minimum of $100 to call somebody out to your home.

Tile and Grout Condition

Occasionally, life gets the better of us and we forget to remember the ins and outs. When your tiles and grout have not been cleaned in a while, your cleaner may charge an additional $100 to $200. This helps consider the added work and time it is going to take to get your tiles and grout back in good, dazzling condition.

Frequency

The ideal time to clean tile and grout is when you make an appointment for a deep cleaning, which probably be carried out at a minimum 1 to 2 times annually. This should be enough as long as you’re routinely cleaning your tiles weekly, which is going to help hinder a build-up of grime and dirt. Don’t forget, the more easy it is to clean, the reduced time your grout cleaning service is going to be need, which is going to cost you less.

Labor

You can plan to pay for your tile and grout cleaning service $0.50 to $5 each sq ft for their labor. The products they are going to use for cleaning are usually included in their labor rates.

Cost to Clean and Seal Tile and Grout Flooring

Sealing your tile and grout is going to help them last longer. Tiles need to be sealed every 3 years, and grout should be sealed following each cleaning. Grout cleaning should be carried out once or twice annually. The cost for cleaning and sealing tile and grout floors is $0.75 to $5 each sq ft.

What Is Grout?

As reported by TCNATile.com, grout is a mixture of cement, aggregate, and other materials (such as sand or water) that creates a water-resistant, compact, and evenly colored material that is typically used to fill spaces or to reinforce existing structures.

Short and sweet, grout is basically a material used to fill the cracks, spaces, or gaps in man-made or natural materials.

There are two main classifications of grout: cementitious and chemical grout. Each grout class also has its own sub-classes, such as sanded and un-sanded grout.

What Is Grouts Purpose?

As mentioned above, one of the most general applications of grout is to fill gaps and seal joints, such as the areas between tiles. Grout is going to fill in those spaces and stops the tiles from eventually moving or getting damaged along their edges.

It can also be used through pressure grouting, which is a method that pumps grout into soft ground or structural gaps to stabilize and strengthen present structures, or structures in which the foundations have moved.

These mixtures also come in handy for inserting rebar in masonry walls or connecting segments of pre-casted concrete.

Why Do You Require Grout Between Your Tiles?

When installing tiles, the tiles you’re installing are going to first be bonded to a floor, wall, or surface of your selection. After the tiles have been clued in place, there are going to be spaces in between each of the tiles.

This is where you need grout.

As mentioned above, grout locks tiles in place and prevents the tiles from eventually moving. Another benefit? Grout also safeguards the edges of tiles and keeps them from easily chipping.

So, when you want a tile installation that is going to look beautiful and last, be sure you get your grout!

Clean and Seal Grout Costs

Are you trying to find out the cost to clean and seal grout? Grout cleaning and sealing costs about $1.80 to $3.00 per sq. ft., or around $360 to $600 for a 200 sq. ft. area like a kitchen floor. Tile contractors usually charge a minimal price of $100-$200 per project.

Why Should I Clean and Seal My Tile Grout?

What is the purpose of grout? Grout is a variety of mortar that is utilized to fill in the gaps between tiles on floors patios, walls, or countertops. Stone or ceramic is a strong material that takes on a lot of heavy use; nevertheless, grout’s irregular surface is ideal at trapping all the grime and dirt that naturally gathers between the tiles. After a couple of years, your tile will probably look as good as the day it was installed, but your grout tells a different story. Get your grimy, tarnished grout cleaned and sealed professionally in order to:

• get rid of mildew and mold
• deep clean debris, dirt, and old detergent residues trapped in between tile spaces
• prevention of further fading and staining
• restore its waterproofing qualities.

Doing so will keep your tile in great shape in the coming years.

Get the Most Bang for Your Buck

Protect your attractive — and costly — tile with routine grout cleaning and sealing. The process will save you the cost of installing new tile. Professionals suggest resealing the grout every three years in higher traffic areas.

Choose the proper sealer to match the tiles’ finish: gloss, semi-gloss, or matt.

Cleaning and sealing tile takes some time, including drying. Prepare yourself to not to use the cleaned and sealed tile for up to 24 hours.

Protect your now clean grout. Get it well sealed. Put doormats at the home’s entrances and change your shoes to slippers and avoid tracking dirt floor tiles.

Source:

1. “Cost to Clean and Seal Grout.” Networx, Networx Systems, Inc., 24 Dec. 2015, www.networx.com/cost-guide/clean-and-seal-grout.

Free Cleaning and Sealing Grout Quote Phoenix

Get a free Tile And Grout Cleaning quote anywhere in Phoenix including Scottsdale, Mesa, Tempe, Chandler or anywhere else by giving us a call today at (602) 370-6082.