Regrout Tile Cost

TILE REGROUTING COSTS

Regrouting a tiled shower, bathroom, or kitchen backsplash costs around $7 – $28 each sq ft.

Cost To Regrout a Tiled Floor

Regrouting a tiled floor costs around $5 – $11 for each sq ft including labor. Regrouting a 200 – 300 square foot living room floor costs around $1,000 – $3,300 on average.

Cost to Regrout a Kitchen and Bathroom

Shower or bathroom regrouting costs around $7 – $28 each sq ft, subject to the area, size and type of tile, type of grout, added sealing, and handiness.

Regrouting a half-bath floor and shower costs around $700 – $2,800. Regrouting a main bathroom and walk-in shower costs around $2,100 – $9,800.

Backsplashes And Countertop Regrouting Costs

Backsplashes and countertop regrouting costs around $5 – $13 each sq ft including labor and materials, subject to the tile shape and its pattern (if it has one).

Regrouting backsplashes costs around $150 – $400 on average. In contrast, new backsplash installation costs around $10 – $50 for each sq ft or $500 – $1,700 on average.

Grout costs for each sq ft

Grout costs around $0.02 – $1.00 each sq ft solely for materials, subject to the type. Epoxy grout is the costliest option but is more long lasting and resistant to water than others. All other types of grout necessitate sealing to hinder staining, cracking, or worse, mold.

Tile regrouting cost factors

The below factors impact the costs of tile regrouting:

• Cost of labor – A regrouting tile contractor charges $20 – $60 each hour for labor, subject to the location, shape of the tile, and the size of the tile joint. A jack of all trades will charge $50 – $80 each hour or $250 – $1,000 entire for regrouting.
• Cost of materials – Grout costs around $0.02 – $1.00 each sq ft solely for materials, subject on the type. Un-sanded epoxy and polymer grouts are more expensive than sanded grout, however, it is not going to stain or crack as easily.
• Condition of the grout – Damaged or falling apart grout might be easier for removing than undamaged grout, decreasing labor time and expenses.
• Width and depth of joints – Wider joints between the tiles necessitates more grout, which raises material expenses. Typical joint sizes are 1/4″, 3/16″, 1/8″, and 1/16″.
• Tile size / type / shape – Larger, squared, or rectangular tiles are less costly to grout than smaller tiles, mosaics, or distinct tile shapes.
• Size of the area / location / accessibility – Larger areas cost more in materials for regrouting, whereas small showers cost more in labor since they’re more difficult to get to.
• Sealing tiles – Grout sealant costs around $0.50 – $1.50 each sq ft on average solely for materials. Sealant is needed for a lot of cement-based grouts but not for epoxy.